Showing 1–24 of 151203 resultsSorted by price: high to low
-
Discontinued Products
Type 4X Stainless Steel Two Door Floormount Enclosure HN4 FM SS Series – (HN4FM726012SS) (DISCONTINUED)
Discontinued ProductsType 4X Stainless Steel Two Door Floormount Enclosure HN4 FM SS Series – (HN4FM726012SS) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem.
Construction
- Formed 12 gauge 304 or 316 stainless steel.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Heavy duty stainless steel lifting eyebolts are provided with reinforcing support angles.
- Doors are supported with heavy gauge continuous hinges.
- New 3-pt padlocking door handle.
- Seamless poured-in place gasket.
- A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
- Center post is removable for easy installation of the inner panel.
- 12″ floor stands are welded to the enclosure.
Standards
- UL 508A Type 3R, 4X and 12
- CSA Type 3R, 4X and 12
- Complies with:
- NEMA Type 3R, 4X, 12 and 13
- IEC 60529, IP66
Finish
- Cover and enclosure are natural stainless steel with a smooth brushed finish.
- Removable 10 gauge inner panel is finished in white powder coating.
Accessories
Additional Inner Panels
Door Stop Kit
Barrier Kits for Type 4 Floormount
Mechanical Interlock
Drip Shield Kit
Type 12/4, 4X Handle Kits
Window Kits
Climate Control
Lighting
General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
304 S.S. 316 S.S. Enclosure Panel Part Number Part Number H W D H W HN4FM604812SS HN4FM604812S16 60.13 48.06 12.69 56.00 44.00 HN4FM604818SS HN4FM604818S16 60.13 48.06 18.69 56.00 44.00 HN4FM606012SS HN4FM606012S16 60.13 60.06 12.69 56.00 56.00 HN4FM606018SS HN4FM606018S16 60.13 60.06 18.69 56.00 56.00 HN4FM726012SS HN4FM726012S16 72.13 60.06 12.69 68.00 56.00 HN4FM726018SS HN4FM726018S16 72.13 60.06 18.69 68.00 56.00 HN4FM727212SS HN4FM727212S16 72.13 72.06 12.69 68.00 68.00 HN4FM727218SS HN4FM727218S16 72.13 72.06 18.69 68.00 68.00 HN4FM727224SS HN4FM727224S16 72.13 72.06 24.69 68.00 68.00 SKU: HN4FM726012SS -
Discontinued Products
Air to Air Heat Exchangers – Type 4X PKS4X Series – (PKS3304A230N4SS) (DISCONTINUED)
Discontinued ProductsAir to Air Heat Exchangers – Type 4X PKS4X Series – (PKS3304A230N4SS) (DISCONTINUED)
Description
- Designed for corrosive outdoor or washdown applications.
- Air to air heat exchangers provide superior technology when there is a lower surrounding air temperature compared to the target internal temperature (difference of at least 10°C/18°F).
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
- Superior energy efficiency and lower maintenance costs versus air conditioners.
Standards
- Maintains enclosure’s NEMA 4X rating
- IP 56
- UR, cUR and CE
Features
- Compact Standard Size: 35″H x 12″W x 16″D (louvers extend 1.5″ on either side)
- R134a refrigerant.
- Thermostat control accessible from inside enclosure.
- EMI/RFI suppression meets CE.
- Door contact provision for power down when enclosure door is opened.
- Gasket, mounting kit and template for cutout and drilling are included.
- Can be mounted vertically or horizontally for application flexibility.
- Cover finished in unpainted 304 stainless steel
- See Manual/Technical Data Sheet for drilling template and full electrical specifications.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Cooling Capacity Dimensions Sample Performance Part No. Voltage – Frequency W/°C W/°F H W D ΔT = 20°C/36°F PKS3134A115N4SS 115V 60 Hz 65 36 35.30 11.97 16.04 1300W (4400 BTU) PKS3134A230N4SS 230V 50/60 Hz 65 36 35.30 11.97 16.04 1300W (4400 BTU) PKS3134A460N4SS 400/460V 50/60 Hz 65 36 35.30 11.97 16.04 1300W (4400BTU) PKS3204A115N4SS 115V 60 Hz 100 56 35.30 11.97 16.04 2000W (6800 BTU) PKS3204A230N4SS 230V 50/60 Hz 100 56 35.30 11.97 16.04 2000W (6800 BTU) PKS3204A460N4SS 400/460V 50/60 Hz 100 56 35.30 11.97 16.04 2000W (6800 BTU) PKS3304A115N4SS 115V 60 Hz 150 83 35.30 11.97 16.04 3000W (10200 BTU) PKS3304A230N4SS 230V 50/60 Hz 150 83 35.30 11.97 16.04 3000W (10200 BTU) PKS3304A460N4SS 400/460V 50/60 Hz 150 83 35.30 11.97 16.04 3000W (10200 BTU) PKS3364A115N4SS 115V 60 Hz 180 100 35.30 11.97 16.04 3600W (12200 BTU) PKS3364A230N4SS 230V 50/60 Hz 180 100 35.30 11.97 16.04 3600W (12200 BTU) PKS3364A460N4SS 400/460V 50/60 Hz 180 100 35.30 11.97 16.04 3600W (12200 BTU) SKU: PKS3304A230N4SS -
Discontinued Products
Type 4X Polyester Wallmount Enclosure PJW Series – (PJW603614L3PT) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Wallmount Enclosure PJW Series – (PJW603614L3PT) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL/cUL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X,12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- 3/8 collar studs are provided for optional inner panel mounting, hardware included. Note: Sizes 36×36″ and larger have 8 collar studs for added stiffness.
- Stainless steel butterfly type “twist latch” door fasteners with padlock provision.
- Captive oil resistant gasket provides a positive seal.
- Integrated mounting flange.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Latch 3 Pt Handle Enclosure Optional Inner Panel Part No. Part No. H W D H W Part No. PJEC363012T PJEC3630123PT 36.48 30.50 12.18 33.00 27.00 18P3327 PJEC363012TW PJEC3630123PTW 36.48 30.50 12.18 33.00 27.00 18P3327 PJW363014L PJW363014L3PT 36.25 30.25 14.13 33.00 27.00 18P3327 PJW363610L PJW363610L3PT 36.25 36.25 10.13 33.00 33.00 18P3333 PJW363614L PJW363614L3PT 36.25 36.25 14.13 33.00 33.00 18P3333 PJW483610L PJW483610L3PT 48.25 36.25 10.13 45.00 33.00 18P4533 PJW483614L PJW483614L3PT 48.25 36.25 14.13 45.00 33.00 18P4533 PJW603610L PJW603610L3PT 60.25 36.25 10.13 57.00 33.00 18P5733 PJW603614L PJW603614L3PT 60.25 36.25 14.13 57.00 33.00 18P5733 SKU: PJW603614L3PT -
Discontinued Products
Type 4X Polyester Wallmount Enclosure PJW Series – (PJW483614L3PT) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Wallmount Enclosure PJW Series – (PJW483614L3PT) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL/cUL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X,12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- 3/8 collar studs are provided for optional inner panel mounting, hardware included. Note: Sizes 36×36″ and larger have 8 collar studs for added stiffness.
- Stainless steel butterfly type “twist latch” door fasteners with padlock provision.
- Captive oil resistant gasket provides a positive seal.
- Integrated mounting flange.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Latch 3 Pt Handle Enclosure Optional Inner Panel Part No. Part No. H W D H W Part No. PJEC363012T PJEC3630123PT 36.48 30.50 12.18 33.00 27.00 18P3327 PJEC363012TW PJEC3630123PTW 36.48 30.50 12.18 33.00 27.00 18P3327 PJW363014L PJW363014L3PT 36.25 30.25 14.13 33.00 27.00 18P3327 PJW363610L PJW363610L3PT 36.25 36.25 10.13 33.00 33.00 18P3333 PJW363614L PJW363614L3PT 36.25 36.25 14.13 33.00 33.00 18P3333 PJW483610L PJW483610L3PT 48.25 36.25 10.13 45.00 33.00 18P4533 PJW483614L PJW483614L3PT 48.25 36.25 14.13 45.00 33.00 18P4533 PJW603610L PJW603610L3PT 60.25 36.25 10.13 57.00 33.00 18P5733 PJW603614L PJW603614L3PT 60.25 36.25 14.13 57.00 33.00 18P5733 SKU: PJW483614L3PT -
Discontinued Products
Type 4X Stainless Steel Wallmount Enclosure w/ Sloped Top ST SS Series – (ST483616SS) (DISCONTINUED)
Discontinued ProductsType 4X Stainless Steel Wallmount Enclosure w/ Sloped Top ST SS Series – (ST483616SS) (DISCONTINUED)
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.
- Sloped top prevents water from resting on top as well as providing potential for controls mounting.
- Impressive styling features like hidden hinges and attractive latching systems make the Eclipse a suitable addition to any high-tech equipment installation.
- A wide range of sizes and practical accessories make this product line a complete package.
Standards
- UL 508A Type 3R, 4, 4X and 12
- CSA Type 3R, 4, 4X and 12
- Complies with
- NEMA 3R, 4, 4X, 12 and 13
- IEC 60529, IP 66
Construction
- Formed 14 gauge 304 stainless steel.
- Continuously welded seams ground smooth.
- Door stiffeners are provided where required for increased strength and rigidity – designed to also permit additional mounting options.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Door latches feature the added safety of quarter turn slot requiring use of tool for opening.
- Doors may be easily removed for modifications and are interchangeable.
- Seamless poured-in place gasket.
- Collar studs provided for mounting inner panel.
- Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.
- Bonding stud provided on door and grounding stud installed in enclosure.
- Hinges are 304 stainless.
- Stainless steel hinge pins and quarter turns.
- Door alignment guide provided on 36″ wide enclosures.
Finish
- Cover and enclosure are natural stainless steel with a smooth brushed finish.
Accessories
Additional Inner Panels
Swing Panel
Swing Frame
Eclipse DIN Rail Mounting Kit
Eclipse DIN Rails- Door Stop Kit
Mounting Foot Kit
Rear Hole Plugs- Drip Shield Kit
Quarter Turn Inserts and Keys
Quarter Turn Assemblies
Padlock Adaptor
Handles
Replacement Hinge Pins- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Inner Panel Part No. H1 H2 W D Part No. H W ST161208SS 16.00 18.89 12.00 8.00 EP1612 14.20 10.20 ST161608SS 16.00 18.89 16.00 8.00 EP1616 14.20 14.20 ST201608SS 20.00 22.89 16.00 8.00 EP2016 18.20 14.20 ST202008SS 20.00 22.89 20.00 8.00 EP2020 18.20 18.20 ST242008SS 24.00 26.89 20.00 8.00 EP2420 22.20 18.20 ST242408SS 24.00 26.89 24.00 8.00 EP2424 22.20 22.20 ST302408SS 30.00 32.89 24.00 8.00 EP3024 28.20 22.20 ST303008SS 30.00 32.89 30.00 8.00 EP3030 28.20 28.20 ST363008SS 36.00 38.89 30.00 8.00 EP3630 34.20 28.20 ST201612SS 20.00 24.35 16.00 12.00 EP2016 18.20 14.20 ST202012SS 20.00 24.35 20.00 12.00 EP2020 18.20 18.20 ST242412SS 24.00 28.35 24.00 12.00 EP2424 22.20 22.20 ST302412SS 30.00 34.35 24.00 12.00 EP3024 28.20 22.20 ST363012SS 36.00 40.35 Yoast SEO Premium
Product data
SKU: ST483616SS -
Discontinued Products
3000-10000 BTU/H Air/Water Heat Exchanger PWS 7000 Series – (PWS7332A230N4LG) (DISCONTINUED)
Discontinued Products3000-10000 BTU/H Air/Water Heat Exchanger PWS 7000 Series – (PWS7332A230N4LG) (DISCONTINUED)
Description
- Designed to use various water sources to cool enclosures where ambient conditions involve high temperatures, harsh conditions or are subject to frequent wash-down.
Standards
- UL, cUL, and CE
- Complies with
- NEMA 3R, 4, 4X
Features
- Compatible with chilled water/glycol, tower water and other circulated coolants
- Integrated thermostat & solenoid value with alarm contact provides automatic temperature control
- Rugged (10 bar) copper tube / aluminum fin heat exchanger with 1/2″ barb connection
- Side, door or internal mounting provides complete installation flexibility
- Low noise, maintenance-free design
- Exterior case, galvanized steel construction finish RAL7035 Light Gray
Accessories
SKU: PWS7332A230N4LG -
Discontinued Products
3000-10000 BTU/H Air/Water Heat Exchanger PWS 7000 Series – (PWS7332A115N4LG) (DISCONTINUED)
Discontinued Products3000-10000 BTU/H Air/Water Heat Exchanger PWS 7000 Series – (PWS7332A115N4LG) (DISCONTINUED)
Description
- Designed to use various water sources to cool enclosures where ambient conditions involve high temperatures, harsh conditions or are subject to frequent wash-down.
Standards
- UL, cUL, and CE
- Complies with
- NEMA 3R, 4, 4X
Features
- Compatible with chilled water/glycol, tower water and other circulated coolants
- Integrated thermostat & solenoid value with alarm contact provides automatic temperature control
- Rugged (10 bar) copper tube / aluminum fin heat exchanger with 1/2″ barb connection
- Side, door or internal mounting provides complete installation flexibility
- Low noise, maintenance-free design
- Exterior case, galvanized steel construction finish RAL7035 Light Gray
Accessories
SKU: PWS7332A115N4LG -
Discontinued Products
Type 4X Polyester Wallmount Enclosure PHW Series – (PHW242410) (DISCONTINUED)
Application
- These enclosures are specially designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors.
- For use where corrosion resistant watertight enclosures are needed to provide protection against windblown dust and rain, splashing and hose directed water.
Standards
- UL 508A 1, 3, 3R, 4, 4X, 12
- CSA 1, 3, 3R, 4, 4X, 12
- Complies with
- NEMA 1, 3, 3R, 4, 4X, 12
- IEC 60529, IP 66
Construction
- Compression molded, fiberglass reinforced polyester.
- Memory retaining, continuous door gasket standard.
- Molded in panel mounting inserts (except where noted).
- Integral mounting feet.
- Stainless steel hardware.
- Padlocking provision.
- Stainless steel butterfly type “twist latch” door fasteners.
- Ported with a continuous hinge.
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass reinforced material is finished in light gray.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Inner Panel Part No. H W D H W Part No. PHW20166 22.75 16.87 7.77 17.00 13.00 18P1713 PHW30247 33.41 26.32 8.81 27.00 21.00 18P2721 PHW20168 22.75 16.87 9.77 17.00 13.00 18P1713 PHW24208 27.00 21.24 9.90 21.00 17.00 18P2117 PHW30208 32.86 20.99 9.89 27.00 17.00 18P2717 PHW201610 22.75 16.87 11.77 17.00 13.00 18P1713 PHW241210 26.95 13.72 11.99 21.00 9.00 18P2109 PHW242410 27.00 25.25 11.90 21.00 21.00 18P2121 PHW302010 32.86 20.99 11.89 27.00 17.00 18P2717 PHW302410 33.41 26.32 11.95 27.00 21.00 18P2721 PHW363010 39.31 32.50 12.05 33.00 27.00 18P3327 PHW201612 22.75 16.87 13.77 17.00 13.00 18P1713 PHW302412 33.41 26.32 13.79 27.00 21.00 18P2721 PHW363012 39.31 32.50 14.05 33.00 27.00 18P3327 PHW483616 51.29 36.62 17.93 45.00 33.00 18P4533 PHW603616 63.50 36.50 18.12 57.00 33.00
…Product data
SKU: PHW242410 -
Discontinued Products
Type 4 Mild Steel Wallmount Enclosure HWHK Series – (HW483616GYHK) (DISCONTINUED)
Discontinued ProductsType 4 Mild Steel Wallmount Enclosure HWHK Series – (HW483616GYHK) (DISCONTINUED)
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.
- Ideal for processing plants, utility, outdoor municipal or petro chemical locations where easy yet secure access is required.
Standards
- UL 508A Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- Complies with
- NEMA 3R, 4, 12 and 13
- IEC 60529, IP 66
Construction
- Formed 14 gauge steel bodies and doors.
- Continuously welded seams ground smooth.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Powder coated black zinc diecast pad lockable handle with 3 point roller latching system secures door.
- Stainless steel continuous hinge on door may be removed by pulling the stainless steel hinge pin
- Seamless poured-in place gasket.
- Collar studs provided for mounting inner panel.
- Bonding stud provided on door and grounding stud installed in enclosure.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating interior and exterior.
Videos
Accessories
Additional Inner Panels
Perforated Inner Panels
Swing Panel Kit- Door Stop Kit
- Type 12/4, 4X Handle Kits
- Drip Shield Kit
Enclosure Stabilizers
Floor Stand Kit- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Overall Dimensions Optional Inner Panel Part No. A B C Part No. H W HW24206GYHK 24.00 20.00 6.00 18P2117 21.00 17.00 HW24246GYHK 24.00 24.00 6.00 18P2121 21.00 21.00 HW24168GYHK 24.00 16.00 8.00 18P2113 21.00 13.00 HW24208GYHK 24.00 20.00 8.00 18P2117 21.00 17.00 HW24248GYHK 24.00 24.00 8.00 18P2121 21.00 21.00 HW24308GYHK 24.00 30.00 8.00 18P2721 27.00 21.00 HW30208GYHK 30.00 20.00 8.00 18P2717 27.00 17.00 HW30248GYHK 30.00 24.00 8.00 18P2721 27.00 21.00 HW30308GYHK 30.00 30.00 8.00 18P2727 27.00 27.00 HW36248GYHK 36.00 24.00 8.00 18P3321 33.00 21.00 HW36308GYHK 36.00 30.00 8.00 18P3327 33.00 27.00 HW42368GYHK 42.00 36.00 8.00 18P3933 39.00 33.00 HW48368GYHK 48.00 36.00 8.00 18P4533 45.00 33.00 HW242010GYHK 24.00 20.00 10.00 18P2117 21.00 17.00 HW302410GYHK 30.00 24.00 10.00 18P2721 27.00 21.00 HW362410GYHK 36.00 24.00 10.00 18P3321 33.00 21.00 HW363010GYHK 36.00 30.00 10.00 18P3327 Product data
SKU: HW483616GYHK -
Discontinued Products
Type 4X Polyester Wallmount Enclosure PHW Series – (PHW241210) (DISCONTINUED)
Application
- These enclosures are specially designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors.
- For use where corrosion resistant watertight enclosures are needed to provide protection against windblown dust and rain, splashing and hose directed water.
Standards
- UL 508A 1, 3, 3R, 4, 4X, 12
- CSA 1, 3, 3R, 4, 4X, 12
- Complies with
- NEMA 1, 3, 3R, 4, 4X, 12
- IEC 60529, IP 66
Construction
- Compression molded, fiberglass reinforced polyester.
- Memory retaining, continuous door gasket standard.
- Molded in panel mounting inserts (except where noted).
- Integral mounting feet.
- Stainless steel hardware.
- Padlocking provision.
- Stainless steel butterfly type “twist latch” door fasteners.
- Ported with a continuous hinge.
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass reinforced material is finished in light gray.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Inner Panel Part No. H W D H W Part No. PHW20166 22.75 16.87 7.77 17.00 13.00 18P1713 PHW30247 33.41 26.32 8.81 27.00 21.00 18P2721 PHW20168 22.75 16.87 9.77 17.00 13.00 18P1713 PHW24208 27.00 21.24 9.90 21.00 17.00 18P2117 PHW30208 32.86 20.99 9.89 27.00 17.00 18P2717 PHW201610 22.75 16.87 11.77 17.00 13.00 18P1713 PHW241210 26.95 13.72 11.99 21.00 9.00 18P2109 PHW242410 27.00 25.25 11.90 21.00 21.00 18P2121 PHW302010 32.86 20.99 11.89 27.00 17.00 18P2717 PHW302410 33.41 26.32 11.95 27.00 21.00 18P2721 PHW363010 39.31 32.50 12.05 33.00 27.00 18P3327 PHW201612 22.75 16.87 13.77 17.00 13.00 18P1713 PHW302412 33.41 26.32 13.79 27.00 21.00 18P2721 PHW363012 39.31 32.50 14.05 33.00 27.00 18P3327 PHW483616 51.29 36.62 17.93 45.00 33.00 18P4533 PHW603616 63.50 36.50 18.12 57.00 33.00
…Product data
SKU: PHW241210 -
Discontinued Products
Hygienic Type 4X Stainless Steel Pushbutton Enclosure HYPB Series – (HYPB6SS) (DISCONTINUED)
Discontinued ProductsHygienic Type 4X Stainless Steel Pushbutton Enclosure HYPB Series – (HYPB6SS) (DISCONTINUED)
Application
- Designed to pushbuttons and indicators while protecting against harsh, hygienic environments.
- Sloped on 4 sides prevent water from resting on top regardless of enclosure orientation.
- Hex head design screws and door-edge mounted silicone gasket allow for easy cleaning in hose-down environments.
- A wide range of sizes and practical accessories make this product line a complete package.
Standards
- UL 508A Type 3R, 12, 4, 4X
- CSA Type 3R, 12, 4, 4X
- NSF – ANSI 169
- Not all accessories shown maintain NSF standard. Some are internal and NSF is not applicable. Refer to each accessory individually or call factory for specifics.
- Complies with
- NEMA 3R, 12, 4, 4X
- IEC 60529, IP69, IP69K
Construction
- Formed 304 stainless steel.
- Sloped 3° on all 4 sides
- Continuously welded seams ground smooth.
- Hex head screw cover can be completely removed for modifications.
- Silicone gasket mounts around entire door edge allowing for efficient cleaning in hygienic environments.
- Gasket can be easily removed and re-installed for cleaning or replacement. Additional silicone gaskets can be ordered separately.
- Multiple pushbutton hole configurations with either 22.5mm or 30.5mm notched holes.
- No pre-drilled wall mounting holes allow for flexible mounting alternatives – weld-in-place, stand-offs
- Bonding stud provided on door and grounding stud installed in enclosure.
Finish
- Cover and enclosure are natural stainless steel with a smooth #4 dairy finish.
Gallery
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
22mm Hole 30mm Hole Enclosure Replacement Part No. Part No. # Holes H W D Gasket HYMPB1SS HYPB1SS 1 7.94 4.88 4.00 HYG85 HYMPB2SS HYPB2SS 2 7.94 4.88 4.00 HYG85 HYMPB3SS HYPB3SS 3 9.94 4.88 4.00 HYG105 HYMPB4VSS HYPB4VSS 4 11.94 4.88 4.00 HYG125 HYMPB4SS HYPB4SS 4 9.94 6.88 4.00 HYG107 HYMPB6SS HYPB6SS 6 11.94 8.88 4.00 HYG129 SKU: HYPB6SS -
Discontinued Products
Hygienic Type 4X Stainless Steel Pushbutton Enclosure HYPB Series – (HYMPB6SS) (DISCONTINUED)
Discontinued ProductsHygienic Type 4X Stainless Steel Pushbutton Enclosure HYPB Series – (HYMPB6SS) (DISCONTINUED)
Application
- Designed to pushbuttons and indicators while protecting against harsh, hygienic environments.
- Sloped on 4 sides prevent water from resting on top regardless of enclosure orientation.
- Hex head design screws and door-edge mounted silicone gasket allow for easy cleaning in hose-down environments.
- A wide range of sizes and practical accessories make this product line a complete package.
Standards
- UL 508A Type 3R, 12, 4, 4X
- CSA Type 3R, 12, 4, 4X
- NSF – ANSI 169
- Not all accessories shown maintain NSF standard. Some are internal and NSF is not applicable. Refer to each accessory individually or call factory for specifics.
- Complies with
- NEMA 3R, 12, 4, 4X
- IEC 60529, IP69, IP69K
Construction
- Formed 304 stainless steel.
- Sloped 3° on all 4 sides
- Continuously welded seams ground smooth.
- Hex head screw cover can be completely removed for modifications.
- Silicone gasket mounts around entire door edge allowing for efficient cleaning in hygienic environments.
- Gasket can be easily removed and re-installed for cleaning or replacement. Additional silicone gaskets can be ordered separately.
- Multiple pushbutton hole configurations with either 22.5mm or 30.5mm notched holes.
- No pre-drilled wall mounting holes allow for flexible mounting alternatives – weld-in-place, stand-offs
- Bonding stud provided on door and grounding stud installed in enclosure.
Finish
- Cover and enclosure are natural stainless steel with a smooth #4 dairy finish.
Gallery
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
22mm Hole 30mm Hole Enclosure Replacement Part No. Part No. # Holes H W D Gasket HYMPB1SS HYPB1SS 1 7.94 4.88 4.00 HYG85 HYMPB2SS HYPB2SS 2 7.94 4.88 4.00 HYG85 HYMPB3SS HYPB3SS 3 9.94 4.88 4.00 HYG105 HYMPB4VSS HYPB4VSS 4 11.94 4.88 4.00 HYG125 HYMPB4SS HYPB4SS 4 9.94 6.88 4.00 HYG107 HYMPB6SS HYPB6SS 6 11.94 8.88 4.00 HYG129 SKU: HYMPB6SS -
Discontinued Products
Window Door HMEWD Series – (HMEDW168) (DISCONTINUED)
- For use with HME Single Door Series only
- Provides maximum viewing area of enclosure equipment
- Maintains NEMA/UL/CSA Type 12 rating
- UL – 94-VO clear polycarbonate window
- Removable and reversible for left or right hand opening
- Complete with double bit insert latching mechanisim
- Door opening 135°
- Note: check compatibility with HFMD and HFMDT
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: mm. Switch units to: inch
Viewing Area For use with Cabinet Part No. H W E H W HMEDW146 1219 434 67 1400 600 HMEDW148 1219 635 67 1400 800 HMEDW166 1419 434 67 1600 600 HMEDW168 1419 635 67 1600 800 HMEDW186 1617 434 67 1800 600 HMEDW188 1617 635 67 1800 800 HMEDW206 1819 434 67 2000 600 HMEDW208 1819 635 67 2000 800 HMEDW226 1819 434 266 2200 600 HMEDW228 1819 635 266 2200 800 SKU: HMEDW168 -
Discontinued Products
Type 4X Polyester Wallmount Enclosure PHW Series – (PHW201610) (DISCONTINUED)
Application
- These enclosures are specially designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors.
- For use where corrosion resistant watertight enclosures are needed to provide protection against windblown dust and rain, splashing and hose directed water.
Standards
- UL 508A 1, 3, 3R, 4, 4X, 12
- CSA 1, 3, 3R, 4, 4X, 12
- Complies with
- NEMA 1, 3, 3R, 4, 4X, 12
- IEC 60529, IP 66
Construction
- Compression molded, fiberglass reinforced polyester.
- Memory retaining, continuous door gasket standard.
- Molded in panel mounting inserts (except where noted).
- Integral mounting feet.
- Stainless steel hardware.
- Padlocking provision.
- Stainless steel butterfly type “twist latch” door fasteners.
- Ported with a continuous hinge.
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass reinforced material is finished in light gray.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Inner Panel Part No. H W D H W Part No. PHW20166 22.75 16.87 7.77 17.00 13.00 18P1713 PHW30247 33.41 26.32 8.81 27.00 21.00 18P2721 PHW20168 22.75 16.87 9.77 17.00 13.00 18P1713 PHW24208 27.00 21.24 9.90 21.00 17.00 18P2117 PHW30208 32.86 20.99 9.89 27.00 17.00 18P2717 PHW201610 22.75 16.87 11.77 17.00 13.00 18P1713 PHW241210 26.95 13.72 11.99 21.00 9.00 18P2109 PHW242410 27.00 25.25 11.90 21.00 21.00 18P2121 PHW302010 32.86 20.99 11.89 27.00 17.00 18P2717 PHW302410 33.41 26.32 11.95 27.00 21.00 18P2721 PHW363010 39.31 32.50 12.05 33.00 27.00 18P3327 PHW201612 22.75 16.87 13.77 17.00 13.00 18P1713 PHW302412 33.41 26.32 13.79 27.00 21.00 18P2721 PHW363012 39.31 32.50 14.05 33.00 27.00 18P3327 PHW483616 51.29 36.62 17.93 45.00 33.00 18P4533 PHW603616 63.50 36.50 18.12 57.00 33.00
…Product data
SKU: PHW201610 -
Discontinued Products
Type 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ242410RTW) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ242410RTW) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “twist latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or fiberglass.
Accessories
Additional Inner Panels
Terminal Kit Assemblies
Swing Panels
Pole Mounting Kit
PJ/PJU/PCJ Replacement Hardware Kits
PJ Stainless Replacement Mounting Feet- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Solid Cover Window Enclosure Optional Inner Panel Part No. Cover Part No. H W D H W Part No. PJ664RT PJ664RTW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864RT PJ864RTW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084RT PJ1084RTW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086RT PJ1086RTW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106RT PJ12106RTW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124RT PJ12124RTW 12.13 12.13 4.13 10.75 10.88 14R1111 PJ12126RT PJ12126RTW 12.13 12.13 6.13 10.75 10.88 14R1111 PJ14126RT PJ14126RTW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148RT PJ16148RTW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168RT PJ18168RTW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168RT PJ20168RTW 20.00 16.00 8.13 18.44 14.44 P2068 PJ24208RT¹ PJ24208RTW¹ 24.00 20.00 8.13 21.00 17.00 18P2117 PJ24248RT¹ PJ24248RTW¹ 24.00 24.00 8.13 21.00 21.00 18P2121 PJ30248RT¹ PJ30248RTW¹ 30.00 24.00 8.13 27.00 21.00 18P2721 PJ242010RT¹ PJ242010RTW¹ 24.00 20.00 10.13 21.00 17.00 18P2117 Yoast SEO Premium
Product data
SKU: PJ242410RTW -
Discontinued Products
Type 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ242410RLW) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ242410RLW) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “snap latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or fiberglass.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
- Swing Panels
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJ Stainless Replacement Mounting Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Solid Cover Window Enclosure Optional Inner Panel Part No. Cover Part No. H W D H D Part No. PJ664RL PJ664RLW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864RL PJ864RLW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084RL PJ1084RLW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086RL PJ1086RLW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106RL PJ12106RLW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124RL PJ12124RLW 13.33 11.85 4.13 12.32 13.72 14R1111 PJ12126RL PJ12126RLW 13.33 11.85 6.13 12.32 13.72 14R1111 PJ14126RL PJ14126RLW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148RL PJ16148RLW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168RL PJ18168RLW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168RL PJ20168RLW 20.00 16.00 8.13 18.44 14.44 P2068 PJ24208RL PJ24208RLW 24.00 20.00 8.13 21.00 17.00 18P2117 PJ24248RL¹ PJ24248RLW¹ 24.00 24.00 8.13 21.00 21.00 18P2121 PJ30248RL¹ PJ30248RLW¹ 30.00 24.00 8.13 27.00 21.00 18P2721 PJ242010RL¹ PJ242010RLW¹ 24.00 20.00 10.13 21.00 17.00 18P2117 Yoast SEO Premium
Product data
SKU: PJ242410RLW -
Discontinued Products
Type 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ242010RTW) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ242010RTW) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “twist latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or fiberglass.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
- Swing Panels
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJ Stainless Replacement Mounting Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Solid Cover Window Enclosure Optional Inner Panel Part No. Cover Part No. H W D H W Part No. PJ664RT PJ664RTW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864RT PJ864RTW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084RT PJ1084RTW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086RT PJ1086RTW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106RT PJ12106RTW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124RT PJ12124RTW 12.13 12.13 4.13 10.75 10.88 14R1111 PJ12126RT PJ12126RTW 12.13 12.13 6.13 10.75 10.88 14R1111 PJ14126RT PJ14126RTW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148RT PJ16148RTW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168RT PJ18168RTW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168RT PJ20168RTW 20.00 16.00 8.13 18.44 14.44 P2068 PJ24208RT¹ PJ24208RTW¹ 24.00 20.00 8.13 21.00 17.00 18P2117 PJ24248RT¹ PJ24248RTW¹ 24.00 24.00 8.13 21.00 21.00 18P2121 PJ30248RT¹ PJ30248RTW¹ 30.00 24.00 8.13 27.00 21.00 18P2721 PJ242010RT¹ PJ242010RTW¹ 24.00 20.00 10.13 21.00 17.00 18P2117 Yoast SEO Premium
Product data
SKU: PJ242010RTW -
Discontinued Products
Type 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ242010RLW) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ242010RLW) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “snap latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or fiberglass.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
- Swing Panels
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJ Stainless Replacement Mounting Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Solid Cover Window Enclosure Optional Inner Panel Part No. Cover Part No. H W D H D Part No. PJ664RL PJ664RLW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864RL PJ864RLW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084RL PJ1084RLW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086RL PJ1086RLW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106RL PJ12106RLW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124RL PJ12124RLW 13.33 11.85 4.13 12.32 13.72 14R1111 PJ12126RL PJ12126RLW 13.33 11.85 6.13 12.32 13.72 14R1111 PJ14126RL PJ14126RLW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148RL PJ16148RLW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168RL PJ18168RLW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168RL PJ20168RLW 20.00 16.00 8.13 18.44 14.44 P2068 PJ24208RL PJ24208RLW 24.00 20.00 8.13 21.00 17.00 18P2117 PJ24248RL¹ PJ24248RLW¹ 24.00 24.00 8.13 21.00 21.00 18P2121 PJ30248RL¹ PJ30248RLW¹ 30.00 24.00 8.13 27.00 21.00 18P2721 PJ242010RL¹ PJ242010RLW¹ 24.00 20.00 10.13 21.00 17.00 18P2117 Yoast SEO Premium
Product data
SKU: PJ242010RLW -
Discontinued Products
Type 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ302410RT) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ302410RT) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “twist latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or fiberglass.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
- Swing Panels
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJ Stainless Replacement Mounting Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Solid Cover Window Enclosure Optional Inner Panel Part No. Cover Part No. H W D H W Part No. PJ664RT PJ664RTW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864RT PJ864RTW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084RT PJ1084RTW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086RT PJ1086RTW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106RT PJ12106RTW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124RT PJ12124RTW 12.13 12.13 4.13 10.75 10.88 14R1111 PJ12126RT PJ12126RTW 12.13 12.13 6.13 10.75 10.88 14R1111 PJ14126RT PJ14126RTW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148RT PJ16148RTW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168RT PJ18168RTW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168RT PJ20168RTW 20.00 16.00 8.13 18.44 14.44 P2068 PJ24208RT¹ PJ24208RTW¹ 24.00 20.00 8.13 21.00 17.00 18P2117 PJ24248RT¹ PJ24248RTW¹ 24.00 24.00 8.13 21.00 21.00 18P2121 PJ30248RT¹ PJ30248RTW¹ 30.00 24.00 8.13 27.00 21.00 18P2721 PJ242010RT¹ PJ242010RTW¹ 24.00 20.00 10.13 21.00 17.00 18P2117 Yoast SEO Premium
Product data
SKU: PJ302410RT -
Discontinued Products
Type 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ302410RL) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ302410RL) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “snap latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or fiberglass.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
- Swing Panels
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJ Stainless Replacement Mounting Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Solid Cover Window Enclosure Optional Inner Panel Part No. Cover Part No. H W D H D Part No. PJ664RL PJ664RLW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864RL PJ864RLW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084RL PJ1084RLW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086RL PJ1086RLW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106RL PJ12106RLW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124RL PJ12124RLW 13.33 11.85 4.13 12.32 13.72 14R1111 PJ12126RL PJ12126RLW 13.33 11.85 6.13 12.32 13.72 14R1111 PJ14126RL PJ14126RLW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148RL PJ16148RLW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168RL PJ18168RLW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168RL PJ20168RLW 20.00 16.00 8.13 18.44 14.44 P2068 PJ24208RL PJ24208RLW 24.00 20.00 8.13 21.00 17.00 18P2117 PJ24248RL¹ PJ24248RLW¹ 24.00 24.00 8.13 21.00 21.00 18P2121 PJ30248RL¹ PJ30248RLW¹ 30.00 24.00 8.13 27.00 21.00 18P2721 PJ242010RL¹ PJ242010RLW¹ 24.00 20.00 10.13 21.00 17.00 18P2117 Yoast SEO Premium
Product data
SKU: PJ302410RL -
Discontinued Products
Type 4 Mild Steel Wallmount Enclosure HWHK Series – (HW36308GYHK) (DISCONTINUED)
Discontinued ProductsType 4 Mild Steel Wallmount Enclosure HWHK Series – (HW36308GYHK) (DISCONTINUED)
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.
- Ideal for processing plants, utility, outdoor municipal or petro chemical locations where easy yet secure access is required.
Standards
- UL 508A Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- Complies with
- NEMA 3R, 4, 12 and 13
- IEC 60529, IP 66
Construction
- Formed 14 gauge steel bodies and doors.
- Continuously welded seams ground smooth.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Powder coated black zinc diecast pad lockable handle with 3 point roller latching system secures door.
- Stainless steel continuous hinge on door may be removed by pulling the stainless steel hinge pin
- Seamless poured-in place gasket.
- Collar studs provided for mounting inner panel.
- Bonding stud provided on door and grounding stud installed in enclosure.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating interior and exterior.
Videos
Accessories
- Additional Inner Panels
- Perforated Inner Panels
- Swing Panel Kit
- Door Stop Kit
- Type 12/4, 4X Handle Kits
- Drip Shield Kit
- Enclosure Stabilizers
- Floor Stand Kit
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Overall Dimensions Optional Inner Panel Part No. A B C Part No. H W HW24206GYHK 24.00 20.00 6.00 18P2117 21.00 17.00 HW24246GYHK 24.00 24.00 6.00 18P2121 21.00 21.00 HW24168GYHK 24.00 16.00 8.00 18P2113 21.00 13.00 HW24208GYHK 24.00 20.00 8.00 18P2117 21.00 17.00 HW24248GYHK 24.00 24.00 8.00 18P2121 21.00 21.00 HW24308GYHK 24.00 30.00 8.00 18P2721 27.00 21.00 HW30208GYHK 30.00 20.00 8.00 18P2717 27.00 17.00 HW30248GYHK 30.00 24.00 8.00 18P2721 27.00 21.00 HW30308GYHK 30.00 30.00 8.00 18P2727 27.00 27.00 HW36248GYHK 36.00 24.00 8.00 18P3321 33.00 21.00 HW36308GYHK 36.00 30.00 8.00 18P3327 33.00 27.00 HW42368GYHK 42.00 36.00 8.00 18P3933 39.00 33.00 HW48368GYHK 48.00 36.00 8.00 18P4533 45.00 33.00 HW242010GYHK 24.00 20.00 10.00 18P2117 21.00 17.00 HW302410GYHK 30.00 24.00 10.00 18P2721 27.00 21.00 HW362410GYHK 36.00 24.00 10.00 18P3321 33.00 21.00 HW363010GYHK 36.00 30.00 10.00 18P3327 Product data
SKU: HW36308GYHK -
Discontinued Products
Type 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ242410RT) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ242410RT) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “twist latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or fiberglass.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
- Swing Panels
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJ Stainless Replacement Mounting Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Solid Cover Window Enclosure Optional Inner Panel Part No. Cover Part No. H W D H W Part No. PJ664RT PJ664RTW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864RT PJ864RTW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084RT PJ1084RTW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086RT PJ1086RTW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106RT PJ12106RTW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124RT PJ12124RTW 12.13 12.13 4.13 10.75 10.88 14R1111 PJ12126RT PJ12126RTW 12.13 12.13 6.13 10.75 10.88 14R1111 PJ14126RT PJ14126RTW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148RT PJ16148RTW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168RT PJ18168RTW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168RT PJ20168RTW 20.00 16.00 8.13 18.44 14.44 P2068 PJ24208RT¹ PJ24208RTW¹ 24.00 20.00 8.13 21.00 17.00 18P2117 PJ24248RT¹ PJ24248RTW¹ 24.00 24.00 8.13 21.00 21.00 18P2121 PJ30248RT¹ PJ30248RTW¹ 30.00 24.00 8.13 27.00 21.00 18P2721 PJ242010RT¹ PJ242010RTW¹ 24.00 20.00 10.13 21.00 17.00 18P2117 Yoast SEO Premium
Product data
SKU: PJ242410RT -
Discontinued Products
Type 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ242410RL) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ242410RL) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “snap latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or fiberglass.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
- Swing Panels
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJ Stainless Replacement Mounting Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Solid Cover Window Enclosure Optional Inner Panel Part No. Cover Part No. H W D H D Part No. PJ664RL PJ664RLW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864RL PJ864RLW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084RL PJ1084RLW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086RL PJ1086RLW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106RL PJ12106RLW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124RL PJ12124RLW 13.33 11.85 4.13 12.32 13.72 14R1111 PJ12126RL PJ12126RLW 13.33 11.85 6.13 12.32 13.72 14R1111 PJ14126RL PJ14126RLW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148RL PJ16148RLW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168RL PJ18168RLW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168RL PJ20168RLW 20.00 16.00 8.13 18.44 14.44 P2068 PJ24208RL PJ24208RLW 24.00 20.00 8.13 21.00 17.00 18P2117 PJ24248RL¹ PJ24248RLW¹ 24.00 24.00 8.13 21.00 21.00 18P2121 PJ30248RL¹ PJ30248RLW¹ 30.00 24.00 8.13 27.00 21.00 18P2721 PJ242010RL¹ PJ242010RLW¹ 24.00 20.00 10.13 21.00 17.00 18P2117 Yoast SEO Premium
Product data
SKU: PJ242410RL -
Discontinued Products
(Discontinued) 297-560 CFM Filterfans PF GEN4 Series – (PF67000T12BK460)
Features
- Maintains a UL Tested NEMA Type 12 seal against enclosure
- UL Recognized to UL 508A, category NITW2/8, UL File #E175229
- Patented “Click & Fit” design provides a hardware free installation!
- Plastic made from strong, heat resistant ABS-FR, UL 94 V0 fire approved material
- Fan Motor is CSA Approved
- Options: Black Grills
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part Number Light Gray RAL 7035 Part Number Black RAL9011 Voltage Power Exhaust Filter Light Gray RAL7035 Exhaust Filter Black RAL9011 PF65000T12LG PF65000T12BK 115V 90W PFA60000LG PFA60000BK PF65000T12LG230 PF65000T12BK230 230V 80W PFA60000LG PFA60000BK PF66000T12LG PF66000T12BK 115V 160W PFA60000LG PFA60000BK PF66000T12LG230 PF66000T12BK230 230V 155W PFA60000LG PFA60000BK PF67000T12LG PF67000T12BK 115V 195W PFA60000LG PFA60000BK PF67000T12LG230 PF67000T12BK230 230V 200W PFA60000LG PFA60000BK PF67000T12LG460 PF67000T12BK460 460V 170W PFA60000LG PFA60000BK Airflow data PF 65000 PF 66000 PF 67000 PFA 60000 Filter material Type 12 Filtermat Type 12 Filtermat Type 12 Filtermat Type 12 Filtermat Unimpeded airflow 297 CFM 462 CFM 560 CFM – Capacity free-flow IP 54: 160 W/K / 160 W/K IP 54: 213 W/K / 218 W/K IP 54: 282 W/K / 292 W/K – IP 55: 168 W/K / 168 W/K IP 55: 257 W/K / 262 W/K IP 55: 308 W/K / 317 W/K – Airflow in combination 230 CFM 295 CFM 368 CFM – (Filterfan + Exhaust Filter) (PF 65000 + PFA 60000) (PF 66000 + PFA 60000) (PF 67000 + PFA 60000) – Capacity in combination 127 W/K 167 W/K 208 W/K – (Filterfan + Exhaust Filter) (PF 65000 + PFA 60000) (PF 66000 + PFA 60000) (PF 67000 + PFA 60000) – Max. static pressure (Airflow = 0) 74 Pa 134 Pa 187 Pa – Filtration efficiency 0.91 0.91 0.91 0.91 Filter material grade G 4 (DIN EN 779) G 4 (DIN EN 779) G 4 (DIN EN 779) G 4 (DIN EN 779) Duty cycle 1 1 1 – Technical data PF 65000 PF 66000 PF 67000 PFA 60000 Outside dimensions in mm 320 x 320 x 150 320 x 320 x 150 320 x 320 x 150 320 x 320 x 39 (height x width x installation depth) Bearing type ball bearings ball bearings ball bearings – Fitting position any, horizontal airflow preferred any – Construction housing and guard of sprayed thermoplastic, self-extinguishing, UL 94 VO Weight 3.2 kg 3.2 kg 3.7 kg 0.7 kg Safety protection in accordance with DIN 31 001 – Color RAL 7035, Light Grey Connections cage clamp cage clamp cage clamp – Noise Level (EN ISO 3741) 52 dB (A) 64 dB (A) 69 db (A) Supplementary data PF 65000 PF 66000 PF 67000 Operating temperature – 15 °C (- 5 °F) to / bis + 55 °C (+ 131 °F) Storage temperature Yoast SEO Premium
Product data
SKU: PF67000T12BK460
